Experience unparalleled protection and convenience
TATTOO SPRAY® is meticulously crafted to meet the highest standards of safety and efficacy. Manufactured to highest level of medical-grade specifications and accreditation.
Forming a flexible, transparent, breathable, protective barrier against
dirt and bacteria, fostering a hygienic environment for natural healing.
Simply wash off dally with antibacterial soap and warm water.
ELEVATE YOUR HYGIENE ROUTINE WITH OUR TRUSTED SOLUTION
PEACE OF MIND AND COMFORT IN ONE CONVENIENT APPLICATION
400ml e
www.tattoospray.co.uk
Apply TATTOO SPRAY® after the tattoo session has finished.
DIRECTIONS FOR USE
1. Cleanse and dry the tattooed area of skin thoroughly.
2. Shake the TATTOO SPRAY can well before use.
3. Holding the spray can 10-20cm from the skin, evenly cover the entire tattooed area with a light coating. Allow the protective film to air dry for a few minutes. Apply additional layers if necessary for enhanced protection. This protective layer can be left on overnight, washed off the following day, and then reapplied. Repeat this process for up to 5 days to maintain optimal protection and support the skins natural healing process.
Please note that this product should not be used on the face, or on tattoos that are bleeding, weeping, infected or secreting.
Ensure you follow all instructions carefully for optimal results and safety. Your safety and the effectiveness of the product are our top priorities
CAUTION Pressurised container: May burst if heated. Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F. Do not pierce or burn, even after use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition. In use, may form flammable/explosive vapour-air modure. Keep out of reach of children EXTREMELY FLAMMABLE AEROSOL Use only as directed. BAMA UN1950 TATTOO SPRAY contains Denatured Ethanol. Harmful to aquatic organisms with long-lasting effects. Use only outdoors or in a well ventilated area. Avoid breathing spray/ vapour. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Dispose of in accordance with local regulations. Avoid release to the environment. Before recycling, empty the can. Recycle the cap separately.
1. Manufacturer Symbol
– Symbol: Factory/building icon
– Description: Indicates the medical device manufacturer. This symbol must be accompanied by the manufacturer’s name and address.
– ISO Reference: ISO 15223-1:2021, Clause 5.1.1
2. Authorised Representative (EC REP) Symbol
– Symbol: EC REP in box
– Description: Indicates the authorized representative in the European Community/Union. This symbol must be accompanied by the representative’s name and address.
– ISO Reference: ISO 15223-1:2021, Clause 5.1.2
3. Reference Number (REF) Symbol
– Symbol: REF in box
– Description: Indicates manufacturer’s catalog number to identify the medical device.
– ISO Reference: ISO 15223-1:2021, Clause 5.1.6
4. Lot Number Symbol
– Symbol: LOT in box
– Description: Indicates the manufacturer’s batch code for identification.
– ISO Reference: ISO 15223-1:2021, Clause 5.1.5
5. Use-By Date Symbol
– Symbol: Hourglass
– Description: Indicates the date after which the medical device is not to be used.
– ISO Reference: ISO 15223-1:2021, Clause 5.1.4
6. Temperature Limit Symbol
– Symbol: Thermometer with 50°C/122°F
– Description: Indicates the temperature limits to which the medical device can be safely exposed.
– ISO Reference: ISO 15223-1:2021, Clause 5.3.7
7. Keep Away from Sunlight Symbol
– Symbol: Sun with house
– Description: Indicates a medical device that needs protection from light sources.
– ISO Reference: ISO 15223-1:2021, Clause 5.3.2
8. General Warning Symbol
– Symbol: Exclamation mark in triangle
– Description: Indicates a warning or need to review accompanying documentation.
– ISO Reference: ISO 15223-1:2021, Clause 5.4.4
9. Unique Device Identifier (UDI) Symbol
– Symbol: UDI in box
– Description: Indicates carrier that contains unique device identifier information.
– ISO Reference: ISO 15223-1:2021, Clause 5.7.10
10. Medical Device Symbol
– Symbol: MD in box
– Description: Indicates the item is a medical device.
– ISO Reference: ISO 15223-1:2021, Clause 5.7.7
11. Recyclable Material Symbols
– Symbol: Multiple recycling symbols (Metal, PP)
– Description: Indicates type of recyclable material.
– ISO Reference: ISO 7000:2019
12. CE Marking
– Symbol: CE
– Description: Indicates conformity with European health, safety, and environmental protection standards.
– Reference: EU Regulation 2017/745
13. UKCA Marking
– Symbol: UKCA
– Description: Indicates conformity with Great Britain’s health, safety, and environmental protection standards.
– Reference: UK Government Guidance on UKCA marking
14. Flammable Material Symbol
– Symbol: Flame in red diamond
– Description: Indicates flammable material hazard.
– Reference: GHS (Globally Harmonized System) hazard pictogram
15. Solvent Abuse Warning Symbol
Symbol: “Solvent abuse can kill instantly” with lightning bolts.
Description: Indicates that inhaling solvents or volatile substances can be fatal immediately. This warning is commonly found on products containing volatile substances to prevent misuse.
ISO Reference: No specific ISO reference, but widely used in consumer safety warnings.
16. Do Not Use if Damaged Symbol
Symbol: A damaged box inside a circle with a diagonal line through it.
Description: Indicates that the product should not be used if the packaging is damaged. This is crucial for medical devices and sensitive equipment where packaging integrity ensures sterility or safety.
ISO Reference: ISO 15223-1:2021, Clause 5.2.8
17. Keep Product Within the Recycling System
Symbol: A person inside a circular arrow loop (three arrows forming a circle).
Description: Indicates that the user should return the product or packaging to the manufacturer for recycling or proper disposal. It is commonly used in take-back programs, especially for electronic waste, batteries, or medical devices.
ISO Reference: This may fall under ISO 7000 (Graphical Symbols for Use on Equipment) or other environmental standards like ISO 14021 for recycling symbols.
